Ken's Clock Clinic

Self Winding Clock Restoration & Products

  • Menu
  • Your Cart
  • Help
  • Home
  • Products
  • Restoration
  • About
  • Library
  • News & Articles
  • Contact Us
Home » Products » Clock Winders » Model 1900W-110V Modular Clock Winder

Model 1900W-110V Modular Clock Winder

1900w-110V front

Model 1900W-110V Modular Clock Winder

This efficient module provides the proper voltage and pulse signal to wind 110 volt DC master clocks or accurately advance 110 volt DC secondary units.

Availability: In Stock

Model: 1900W-110V

Price: $139.00

This efficient module provides the proper voltage and pulse signal to wind 110 volt DC master clocks or accurately advance 110 volt DC secondary units.
loading
1900w-110V kit1900w-110V plug1900w-110V front

Description

If you own one of the unusual minute-wind Stromberg, ITR or IBM master or secondary clocks with a 110V DC coil, this product is what you need to safely and efficiently wind your clock. It will output the proper pulse to advance the winding movement on the clock. Timing accuracy is 4 seconds per month, exceptional accuracy suitable for use with secondary clocks. It replaces traditional line-powered solutions, eliminating shock and safety hazards which are almost inevitable with these other solutions. Because the timing is self-contained on this innovative unit, it eliminates the need for the minute contacts. These contacts are often found burned through due to the high coil voltage.

If you need a winder for a clock with a coil voltage not shown here, please contact us. It is likely that we have a solution available for you.

Features & Specs

Output: 110 Volts pulsed to wind clock once per minute (300ms dwell)

Voltage Accuracy: 5% no-load tolerance

Timing Accuracy of pulse: 4 seconds per month (more than accurate enough to drive 110 volt slaves)

Power: 6 watts peak, sufficient to drive 2K ohm coils (will drive any 110 volt master we are aware of)

Power Source: 9-12 Volts DC input (using included battery holder or available wall adapter)

Battery Life: Will run typical 110 volt clock for about 9 months to 1 year between battery changes

AC Power: Can also be supplied with plug-in Energy Star AC adapter

Dimensions: 4 1/2" x 2 1/4" x 1 5/8" tall

Included Accessories: Battery holder, wire, detailed instructions.

Availability: Built to order from materials kept on hand. Allow 2 weeks After Receipt of Order.

Shipping

Important Note: Clock winders and synchronizers are built in batches once per month.  Please be prepared for a 3-4 week lead time on these. Timing products (such as the Model 1900S and 1900W series) require pre-shipment calibration and verification which requires time to validate quality performance (2 weeks).

Unless otherwise noted at Checkout, a handling fee of $5.00 is included in each order (also covers packaging material) in the continental United States. Therefore the total shipping number shown in Checkout is the sum of the actual fee (from the carrier, usually UPS) plus this handling fee. Our standard carrier is UPS 3-Day in the USA and UPS International outside the USA.

We try to maintain a policy of "no minimum order dollar amount," but handling fees cannot be avoided.

Policy on return shipping: Customer assumes responsibility for shipping and handling costs, regardless of reason. Restated: Customer pays for return shipping and handling in all cases, including warranty returns.

Ken's Clock Clinic reserves the right to adjust shipping fees or carriers to accommodate order size. If an adjustment is necessary you will be notified prior to shipment. This especially applies to international orders, although we strive to provide and adhere to best estimate possible at time of order.

Warranty

Important Information and Warranty Terms

Prices are shown in U.S. Dollars (USD).

We make every attempt to provide information needed to choose the right product. We encourage you to contact us if in doubt. Restocking charge is 20% of product purchase price on most models. We do not pay return postage if you choose the wrong product. We no longer carry non-renewable batteries to avoid problems with returns.

If you change your mind and don't want the product, you will receive a store credit. We no longer issue refunds, for example, if you buy a set of batteries, the clock doesn't work, and you refuse our help on the movement. We are happy to exchange for another product with a 20% restocking fee and subject to our standard shipping policy.

We have terms on our generous warranty to avoid our generosity being exploited. We do NOT warranty product that has been disassembled, tampered with, modified, or abused. Our products are not hobby or experiment platforms and are not meant to be used for this purpose. You will pay replacement price if you modify or disassemble the product, damage it, then attempt to return it for warranty repair.

We strive to learn from any defective product. If a unit is modified or disassembled, this destroys the root cause traceability and an opportunity to improve product is lost.

There are some products (for example, the Model 1900WG-4.5V) which are non-returnable due to their low sales volume or custom nature. These are noted in the product description. Please contact us to verify application before purchase.

On-line purchases are processed securely. Credit card purchasing is available through this system. Please contact us if you wish to purchase via some other means.

Sales tax of 8.15% will be applied to residents of Colorado; or home office is based in Broomfield, CO.

What is covered by our 5 year warranty on Renewable Units:

  • Internal battery holder
  • Internal wiring and electronics, connectors (all products)
  • Rechargeable Cell on 1900R units, subject to pro-rating.

The only products subject to pro-rating are the 1900R family rechargeables. With these, for every year from manufacture you will need to pay $10.00 plus return shipping to have it refurbished. The 1900R products are serialized for tracking purposes.

What is NOT covered by our 5 year warranty on Renewable Units:

  • We do NOT cover the internal alkaline cells which are user replaceable.
  • Any unit which has been tampered with or altered voids warranty.
  • Return shipping is users responsibility.
  • Products over 5 years old and any 1900R with a 1000 series serial number. If your 1900R with 1000 series serial number fails, we will happily replace it with a new Model 1900R3 at its normal purchase price. 1000 series units are now over 12 years from last manufacture.

Summary - Model 1900W-110V Modular Clock Winder

Model: 1900W-110V

Price: $139.00

Availability: In Stock

1900w-110V front
This efficient module provides the proper voltage and pulse signal to wind 110 volt DC master clocks or accurately advance 110 volt DC secondary units.

Your Shopping Cart

Total: $

Edit Cart
Checkout

Related Products

No related products.

Related Documents

No related documents.

Related News & Posts

No related news or posts.

payment icons

Secure Checkout
Easy - Safe - Fast

Item added! View Cart

View Cart

General Links

  • Self Winding Clock Products
  • Clock Restoration Services
  • Recent News & Articles

Useful Resources

  • Battery Selection Guide
  • Frequently Asked Questions
  • Help

Helpful Pages

  • Your Shopping Cart
  • Return and Cancellation Policy
  • Shipping and Freighting Policies

© 2017 Ken's Clock Clinic - Self Winding Clock Products & Restoration - Privacy