While some of us might disagree, Ken’s Clock Clinic is not technically considered an essential business. Nonetheless, we are striving to keep our business up and operational. However, in compliance with local governing bodies, we cannot bring in help which is sometimes desperately needed during this time. The consequence of this is, in a word, […]

We often say we are as much in the memories and heirloom business as we are in the clock restoration business.  And strangely, for the number of wonderful letters of appreciation we receive, we don’t normally share them in our blogs.  But this one was so well written that we had to post it here […]

When will I receive my product? When you place an order with us, this is bound to be the first question you ask.  Today, folks are accustomed to large online mass-market entities with 75 nationwide 500,000 sq. ft. fulfillment centers that offer same-day overnight shipping.  We wish that specialized self-winding clocks were a mass market […]

Why is this happening?  The movement was just restored!  Do the contacts need cleaning already? Every SWCC owner asks that question eventually.  It turns out that it is normal.  Consider the sequence that occurs at winding: 1.  Cam lifts hourly contact and just touches mating finger contact 2.  Vibration from motor causes cam to back […]

Are you the owner of a National Self-Winding Clock, but struggle with it because of intermittent contact problems?  Your solution to the problem has arrived! The Model 1900WG-4.5V is specifically designed to drive the collectible and very unique National Self-Winding Clock Company (of Champaign, Illinois) movements.  Most NSWCC movements have intermittent problems with contacts by […]

We get asked this question rather frequently.  Recently, we posted this answer to a customer in an email, so I thought we’d share it here. It is tough to recommend anything without knowing the condition of the movement.  Here are some general thoughts. With SWCC Style F movements, cleaning annually is not recommended or needed. […]

This is a plea to our fellow clock repair and clockmaker friends.  Please stop soldering mechanical horological parts! We have seen our share of disastrous and unsightly solder globs, burnt and warped parts, corrosion and rust related to the flux used in soldering.  And what’s worse:  most solder joints performed on clocks don’t hold worth […]

Sometimes well meaning clock repair folks attempt to repair their own SWCC movements, and the results can be difficulty and damage.  To avoid issues, here are some observations on rebushing SWCC plates, where misalignment can lead to major trouble. It is disappointing to see movements defaced with huge reamers which leave ugly and deep burrs […]

AVAILABLE NOW!  Our new Thor AND Hercules frequency converters!  Thor replaces the original Model 1935-60W with more power at a more affordable price!  And, Hercules sets the new bar, at 200 watts (240 watts intermittent)!  If you would like to learn more or to order Thor, please click Thor.  For Hercules, click Hercules.  You can […]